CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 631)

Useful Utilities
615
11
11.17.3 Setting up IP Devices
1. Double-click the GV-IP device to open the setting page of the device.
Figure 11-98
2. Click the different tabs to access the following settings:
[Set IP Address] Type the IP address, subnet mask, default gateway and DNS server of the
device. You can also customize the HTTP port and VSS port.
[Firmware Upgrade] To upgrade the firmware of the device, click Browse to specify the path of
the firmware file and click Upgrade to proceed. You can select Upgrade all devices to upgrade
all other GV IP devices of the same username, password and model.
[Device Name] Type a name for the device.
[Export settings] Click Browse to specify a path. Click the Export Settings button to export the
device settings.
[Import Settings] Specify the location of the file to import camera settings to an IP device. If
Upgrade all devices is selected, the settings will apply to all other devices of the same username,
password and model. You can select Password settings and Network settings to also import
the password and network settings.
[Reboot] Click Reboot to reboot the device or click Light Show to make the device LED flash.