CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 428)

412
8.6.15 Host Information
To show the host information of the selected GV-System, click the Host Information button (No.12,
Figure 8-34) to display the following window. The Host Information window contains the following three
categories. Use the control tabs to toggle among them.
Figure 8-44 The Host Information Window
[Alarm List] Displays a list of alarm events occurred in the selected GV-System. Clicking the Reset
button will clear the listed events. New events will be generated until the alarms of the remote site are
invoked.
[Host Information] The upper section shows the general information of the connected GV-System.
The lower section shows the number of MPEG4, RPB, and audio channels currently serving over the
Internet.
[Log List] Displays a history of login and logout information.