CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 537)

Useful Utilities
521
11
4. Run DMPOS. exe. This dialog box appears.
Figure 11-17
5. In the Screen Setup tab, select Twin View from the Displayer Mode drop-down list.
6. Click the desired application tab to move the application to the second monitor. In this case,
ViewLog is used as an example.
7. In the ViewLog tab, select Monitor 2 from the Select Monitor drop-down list.
8. Click OK.
9. Start GV-System. It should appear on Monitor 1.
10. Click the ViewLog button on the main screen and select Video/Audio log from the menu.
ViewLog should appear on Monitor 2.
Note: The Set Position option allows you to determine where to position GV-System on Windows. It
is only necessary if your GV-System is set to 800 x 600 panel resolutions but your Windows desktop
is set to 1024 x 768 or higher. It is recommended that both GV-System and Windows desktop to be
set to the same resolution. To set the panel resolution of GV-System, click Configure button, select
General Setting, select System Configure and find Panel Resolution.