CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 501)

Short Message Service
485
10
10.3.2 Server Settings
Click the Server Setting button (No. 2, Figure 10-1) to display the following Server Setting dialog box.
There are three major tabs in the dialog box: (1) General, (2) Message Filter, and (3) Notify
[General]
Figure 10-3 Server Setting-General
[Network] Define the port of the SMS Server, or leave it as default. To use UPnP for automatic port
configuration to your router, click the Arrow button. For details, see UPnP Settings in Chapter 8.
[Security] Enable to apply enhanced Internet security. Please note when the feature is enabled, the
subscribers using earlier version than 8.0 cannot access the SMS Server anymore.
[Startup]
„ Auto Start Service when Sever Startup: Automatically starts SMS services when the program
starts.
„ Minimize to System Tray when auto start service: Minimizes the SMS Server window to
notification area when it starts.
„ Auto save the PIN number after start service: Automatically saves the PIN number when SMS
services start.