CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 335)

I /O Applications 6
6.6.8 System-Wide Triggers
The System-Wide feature gives privileges to remote applications, such as Center V2 and VSM, to
force the outputs in the Main System for cascade triggers.
For this example, the System-Wide feature is enabled in Output 1. When the VSM operator manually
forces Output 1, Output 2, 3 and 4 will be triggered in a cascade series. If the System-Wide feature is
disabled, the operator can only force Output 1 without cascade triggers.
Figure 6-27
To enable this feature, right-click an output at the top level, and then select System-Wide Output.
319