CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 346)

330
„ The parameter/IP address button:
For the serial type of POS device, click this button to configure Baud Rate, Data Bits, Parity
and Stop Bits of the POS device.
For the TCP/IP type of POS device, click this button to configure Device Port and Password to
match those of the GV-System.
5. Click Add to apply the settings.
6. In the POS Text Sender dialog box, the POS device is added to the connection list. Click Start to
start the connection. You can also minimize the dialog box to the notification area
.
At the GV-System:
It is required to insert an appropriate dongle to the GV-System for this integration to work.
To set up a POS device in GV-System, see POS Device Setup later in this chapter.
Note: The maximum data size of each transaction to be transferred to a GV-System is 100 KB.
When the data size of a transaction exceeds the limit, only the latest data will be transferred and
displayed at the GV-System.