CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 510)

494
10.6 SMS Notification
After setting up the SMS Server, you will need to connect the GV-System to the SMS Server, assign
mobile phones to receive SMS alert messages, and set up the types of events to send alert
notification.
10.6.1 Connecting GV-System to SMS Server
To connect the GV-System to the SMS Server, follow these steps:
1. On the main screen, click the Configure button (No. 14, Figure 1-2), select General Setting, and
select System Configure. The System Configure window (Figure 1-3) appears.
2. In the Send Alerts Approach section, click the Arrow button. This dialog box appears.
Figure 10-12 Send Alerts Approach Setup
3. Select Alternative Alert Approach to enable sending alerts by SMS messages.
4. Specify the Interval between two sent-out messages. The Interval time can be set up to 1440
minutes. Any alert condition will be ignored by the system during the interval.
5. Click the Account Setting button. This dialog box appears.
Figure 10-13 SMS Setup- Connection Setup