System architecture, How to use this guide, System architecture 1.9. how to use this guide – ElmoMC SimplIQ Digital Servo Drives-Solo Guitar ABS Installation Guide User Manual
Page 13
Solo Guitar Absolute Feedback Installation Guide
Introduction
MAN-SOLGUIABSIG (Ver. 1.403)
13
1.8. System Architecture
Figure 1: Solo Guitar Absolute Feedback System Block Diagram
1.9. How to Use this Guide
In order to install and operate your Elmo Solo Guitar Absolute Feedback servo drive, you will
use this manual in conjunction with a set of Elmo documentation. Installation is your first step;
after carefully reading the safety instructions in the first chapter, the following chapters
provide you with installation instructions as follows:
Chapter 3, Installation
, provides systematic instructions for unpacking, mounting,
connecting and powering up the Solo Guitar Absolute Feedback.
Chapter 4, Technical Specifications
, lists all the drive ratings and specifications.
Upon completing the instructions in this guide, your Solo Guitar Absolute Feedback servo drive
should be successfully mounted and installed. From this stage, you need to consult higher-level
Elmo documentation in order to set up and fine-tune the system for optimal operation.