Main and auxiliary feedback combinations – ElmoMC SimplIQ Digital Servo Drives-Solo Guitar ABS Installation Guide User Manual
Page 27
Advertising
Solo Guitar Absolute Feedback Installation Guide
Installation
MAN-SOLGUIABSIG (Ver. 1.403)
27
1.15.1. Main and Auxiliary Feedback Combinations
The Main Feedback is always used in motion control devices whereas Auxiliary Feedback is
often, but not always used. The Auxiliary Feedback connector has two ports (B1 and B2). When
used in combination with Main Feedback, the Auxiliary Feedback can be set by the software as
follows:
Main Feedback Auxiliary Feedback: Output
Software: YA[4] = 4 (Auxiliary Feedback: output)
Stegmann
Absolute
Encoder
Input
SOLG028B
Heidenhain
Absolute
Encoder
Input
Main Feedback:
Stegmann
or Heidenhain
Encoder Input
Auxiliary Feedback:
B2: Emulated Differential
Buffered Encoder Output.
B1: Not available
Advertising