ElmoMC ExtrIQ Digital Servo Drives-Eagle HV - Manual (Page 11)

Eagle HV Installation Guide Safety Information
MAN-EAG-HVIG (Ver. 1.502)
www.elmomc.com
11
1.4. CE Marking Conformance
The Eagle HV servo drive is intended for incorporation in a machine or end product. The actual
end product must comply with all safety aspects of the relevant requirements of the European
Safety of Machinery Directive 98/37/EC as amended, and with those of the most recent
versions of standards EN 60204-1 and EN 292-2 at the least.
According to Annex III of Article 13 of Council Directive 93/68/EEC, amending Council Directive
73/23/EEC concerning electrical equipment designed for use within certain voltage limits, the
Eagle HV meets the provisions outlined in Council Directive 73/23/EEC. The party responsible
for ensuring that the equipment meets the limits required by EMC regulations is the
manufacturer of the end product.
1.5. Warranty Information
The products covered in this manual are warranted to be free of defects in material and
workmanship and conform to the specifications stated either within this document or in the
product catalog description. All Elmo drives are warranted for a period of 12 months from the
time of installation, or 18 months from time of shipment, whichever comes first. No other
warranties, expressed or implied — and including a warranty of merchantability and fitness for
a particular purpose — extend beyond this warranty.