ElmoMC ExtrIQ Digital Servo Drives-Eagle HV - Manual (Page 68)

Eagle HV Installation Guide Technical Specifications
MAN-EAG-HVIG (Ver. 1.502)
www.elmomc.com
68
4.1.5. Feedback Options
• Incremental Encoder – up to 20 Megacounts (5 Megapulses) per second
• Digital Halls – up to 2 kHz
• Incremental Encoder with Digital Halls for commutation – up to 20 Megacounts per second
for encoder
• Interpolated Analog (Sine/Cosine) Encoder – up to 250 kHz (analog signal)
 Internal Interpolation - up to x4096
 Automatic Correction of amplitude mismatch, phase mismatch, signal offset
 Emulated encoder outputs, differential, buffered of the Analog encoder
• Absolute Encoder
• Analog Hall Sensor
• Resolver
 Programmable 10 to 15 bit resolution
 Up to 512 revolutions per second (RPS)
 Emulated encoder outputs, differential, buffered of the Resolver.
• Auxiliary Encoder inputs (ECAM, follower, etc.) differential, buffered.
• Tachometer & Potentiometer
• The Eagle HV can provide power (5 V, 2x200 mA max) for Encoders, Resolver or Halls.