ElmoMC ExtrIQ Digital Servo Drives-Eagle HV - Manual (Page 26)

Eagle HV Installation Guide Installation
MAN-EAG-HVIG (Ver. 1.502)
www.elmomc.com
26
3.5.3. Connecting the Power Cables
The power connectors of the Eagle HV are located as follows:
For S type drives:
Pin Function Cable Pin Positions
VP+ Pos. Power input DC Power
VN- Neg. Power input DC Power
N N/A N/A
PE Protective earth DC Power
AC Motor
Cable
DC Motor
Cable
PE Protective earth Motor Motor
M1 Motor phase Motor N/C
M2 Motor phase Motor Motor
M3 Motor phase Motor Motor
Auxiliary 24 VDC Backup Supply
(CAN connector)
VL- Neg. Aux. input Backup Power
VL+ Pos. Aux. input Backup Power
Table 4: Connectors for Main DC Power, Backup Supply and Motor Cable –S Type Drives
Note: When connecting several motors, all the motor phases must be connected in an
identical sequence.