ElmoMC ExtrIQ Digital Servo Drives-Eagle HV - Manual (Page 3)

Revision History
Version Details
1.0 Initial release
1.1 Updated catalog number
1.2 Added section on High Voltage Thermal data. Sections 4.3 and 4.3.1: Auxiliary
Supply Voltage range: 18 V to 30 V.
Formatted according to the new template.
“Metronome” was replaced by the “Composer” software.
1.300 Added a caution and recommendation on the type of cleaning solution to use
for the Elmo unit.
Updated Figure 3, Figure 4 and Figure 26.
Updated Section 3.5.9, Section 4.10.1, and Section 4.10.2.
1.301 Section 3.5.10: Communication Cables – updated
Section 3.5.10.1: RS-232 Communication – updated
Section 3.5.10.2: CAN Communication – updated
1.400 Added 800 V version
1.500 Changes to connection instructions regarding motor power and main power.
1.501 Updated Section 3.5.3.3: Direct-to-Mains Power Source (Non-Isolated
Rectifier)
1.502 General format update