ElmoMC ExtrIQ Digital Servo Drives-Eagle HV - Manual (Page 19)

Eagle HV Installation Guide Installation
MAN-EAG-HVIG (Ver. 1.502)
www.elmomc.com
19
3.2. Unpacking the Drive Components
Before you begin working with the Eagle HV system, verify that you have all of its components,
as follows:
• The Eagle HV servo drive
• The Composer software and software manual
The Eagle HV is shipped in a cardboard box with Styrofoam protection.
To unpack the Eagle HV:
1. Carefully remove the servo drive from the box and the Styrofoam.
2. Check the drive to ensure that there is no visible damage to the instrument. If any damage
has occurred, report it immediately to the carrier that delivered your drive.
3. To ensure that the Eagle HV you have unpacked is the appropriate type for your
requirements, locate the part number sticker on the side of the Eagle HV. It looks like this:
The catalog number (P/N) at the top gives the type designation as follows:
4. Verify that the Eagle HV type is the one that you ordered, and ensure that the voltage
meets your specific requirements.