Barco DCS-200 - Manual (Page 122)

122 DCS-200 • User’s Guide
^K==péÉÅáÑáÅ~нбзел
Format Table
cçêã~í=q~ÄäÉ
The table below lists the available input and output formats for the DCS-200. Each entry
uses the following convention: Format @Fv (Hz). Most of the formats listed in this table
are supported for inputs and outputs. Formats that are supported only for input or only for
output sources are designated in bold in the Input/Output column.
Note The DCS-200’s output can be set to progressive formats only.
Table A-10. DCS-200 Input and Output Formats
Format Input Color Space Input/Output
Apple 1200p @60 RGB Input/Output
NTSC (480i) SMPTE Input Only
PAL (576i) SMPTE Input Only
640x480 @59.94 RGB Input/Output
640x480 @60 RGB Input/Output
640x480 @72 RGB Input/Output
640x480 @75 RGB Input/Output
640x480 @85 RGB Input/Output
720x480p SMPTE, RGB Input/Output
720x575p SMPTE, RGB Input/Output
800x600 @50 RGB Input/Output
800x600 @56 RGB Input/Output
800x600 @59.94 RGB Input/Output
800x600 @60 RGB Input/Output
800x600 @72 RGB Input/Output
800x600 @75 RGB Input/Output
800x600 @85 RGB Input/Output
875p RGB Input/Output
1024x768 @47.95 RGB Input/Output
1024x768 @48 RGB Input/Output
1024x768 @50 RGB Input/Output
1024x768 @59.94 RGB Input/Output
1024x768 @60 RGB Input/Output
1024x768 @70 RGB Input/Output
1024x768 @71.93 RGB Input/Output