System commands, Autocfg, Autosave – Barco DCS-200 User Manual
Page 151: Autotake, Blktran, Context, Autocfg autosave autotake blktran context, Póëíéã=`згг~езл, K==oéãçíé=`зенкзд
DCS-200 • User’s Guide
151
_K==oÉãçíÉ=`зенкзд
Remote Commands
12:"Black"
13:"Red"
14:"Green"
15:"Blue"
póëíÉã=`згг~еЗл
^rql`cd=
•
Description: Auto Input Configuration Mode
•
Command Format: AUTOCFG -m (mode)
•
Parameters: -m (mode): 0 - off, 1 - on (default: off)
•
Query Format: AUTOCFG -?
•
Query Response: AUTOCFG -m (mode) --min 0 -- max 1
^rqlp^sb=
•
Description: Auto Input Settings Save
•
Command Format: AUTOSAVE -m (mode)
•
Parameters: -m (mode): 0 - off, 1 - on (default: off)
•
Query Format: AUTOSAVE -?
•
Query Response: AUTOSAVE -m (mode) --min 0 -- max 1
^rqlq^hb=
•
Description: Auto Take Mode
•
Command Format: AUTOTAKE -m (mode)
•
Parameters: -m (mode): 0 - off, 1 - on (default: off)
•
Query Format: AUTOTAKE -?
•
Query Response: AUTOTAKE -m (mode) --min 0 -- max 1
_ihqo^k=
•
Description: Sets whether going to black is a direct transition or requires a
TAKE.
•
Command Format: BLKTRAN -m (mode)
•
Parameters: -m (mode): 0 - do an immediate transition, 1 - take is required
(Default: off)
•
Query Format: BLKTRAN -?
•
Query Response: BLKTRAN -m (mode) --min 0 -- max 1
`lkqbuq=
•
Description: Sets menu context
•
Command Format: CONTEXT -m (mode)