Barco DCS-200 - Manual (Page 130)

130 DCS-200 • User’s Guide
_K==oÉãçíÉ=`зенкзд
Error Codes
bêêçê=`зЗЙл
This section provides DCS-200 error codes:
bêêçê=`çÇÉëW==dÉåÉê~ä=c~бдмкЙл
The table below lists general failure codes:
bêêçê=`çÇÉëW==kç=bêêçê
The table below lists the “no error” code:
Table B-1. DCS-200 General Error Codes
Code Description
-9999 Generic fail
-9998 Operation is not applicable in current state
-9997 UI Related... Did not get response from device
-9996 UI Related... Did not get valid response from device
-9995 Timeout occurred
-9994 Parameter / data out of range
-9993 Searching for data in an index, no matching data
-9992 Checksum didn't match
-9991 Version didn't match
-9990 UI Related... Current device interface not supported
-9989 Pointer operation invalid
-9988 Part of command had error
-9987 Buffer overflow
-9986 Initialization is not done (still in progress)
Table B-2. DCS-200 “No Error” Code
Code Description
0 Successful