Barco DCS-200 - Manual (Page 155)

DCS-200 • User’s Guide 155
_K==oÉãçíÉ=`зенкзд
Remote Commands
The SERIAL query will return only one option parameter at a time. If no
option is specified, an error code will be returned.
• Query Response: SERIAL -b (baud) --min 0 -- max 3
SERIAL -p (parity/etc) --min 0 -max 4
SERIAL -h (handshaking) --min 0 -max 1
qbjm
• Description: Query only command for the temperature of the unit.
• Query Format: TEMP -?
• Query Response: TEMP -c (celsius) -f (fahrenheit)
qokqfjb=
• Description: Set transition time
• Command Format: TRNTIME -s (seconds)
• Parameters: -s (seconds): 1.5 - 5.0 (default: 1.5)
• Query Format: TRNTIME -?
• Query Response: TRNTIME -s (seconds) --min 1.5 -- max 5
sbo
• Description: Display Version info
• Command Format: VER
• Parameters: N/A
• Query Format: N/A
• Query Response: N/A
sca_oq=
• Description: Set VFD brightness
• Command Format: VFDBRT -b (brightness) -f
• Parameters:
-b (brightness): 1 - 16 (default: 10)
-f: Command from front panel
• Query Format: VFDBRT -?
• Query Response: VFDBRT -b (brightness) --min 1 -- max 16
hЙу=`згг~еЗл
ihbv=
• Description: Luminance Key definition
• Command Format: LKEY -m (mode) -s (source) -c (clip) -g (gain) -o (opacity) -h
(hoffset) -v (v offset)