Barco DCS-200 - Manual (Page 98)

98 DCS-200 • User’s Guide
4. Operation
Using Keys
jáñ=hÉó=ré
„
Use the following steps to mix a key up, over a selected source:
Initial system state: Key is OFF Program
Key Auto Take: ON
Figure 4-70. Mix Key Up
1. Select the desired “background” source, and transition it to program with a TAKE.
2. Press KEY to mix the key up.
jáñ=hÉó=açïå
„
Use the following steps to mix a key down:
Initial system state: Key is ON Program
Key Auto Take: ON
Figure 4-71. Mix Key Down
1. Press KEY to mix the key down.
jáñ=pçìêÅÉ=йдмл=hЙу=rй
„
Use the following steps to transition to a new source, and mix a key up:
Initial system state: Key is OFF Program
Key Auto Take: OFF
Figure 4-72. Mix Source plus Key Up
1. Select the source that you want to be the next background. The button blinks.
2. Press KEY. The button blinks to indicate “pending.”
3. Press TAKE to transition to the new source and mix the key up.
Black
Trans Time
Video Source 1
Key Source
Black
Video
Key Source
Trans Time
Source 1
Black
Video
Trans Time
Source 1 Source 2
Key Source