Barco DCS-200 - Manual (Page 142)

142 DCS-200 • User’s Guide
_K==oÉãçíÉ=`зенкзд
Remote Commands
feqlq^i
• Description: Input Horizontal Total Adjust. This command is only adjustable for
analog input types. Other input types will provide query information only.
• Command Format: IHTOTAL -i (input) -t (total)
• Parameters:
-i (input): 1 - 8 for adjustments (7 & 8 only if itype is analog); 1 - 9 for
query
-t(total): In pixels
• Query Format: IHTOTAL -i (input) -?
• Query Response: IHTOTAL -i (input) -t (total) --min (total min) -- max (total max)
ferb
• Description: Input Hue Adjust. This command is only valid for SDI, Y/C and
CVBS inputs.
• Command Format: IHUE -i (input) -h (hue)
• Parameters:
-i (input): 1 - 9
-h (hue): -90 - +90 (Default: 0)
• Query Format: IHUE -i (input) -?
• Query Response: IHUE -i (input) -h (hue) --min -90 --max 90
fj^m
• Description: Maps the input file configuration for the selected input.
• Command Format: IMAP -i (input) -f (file)
• Parameters: -i (input):1 - 9
-f (file): 1 - 64
• Query Format: IMAP -i (input) -?
• Query Response: IMAP -i (input) -f (file)
fo_oq
• Description: Input RGB Brightness Adjust. This command is only valid for
formats with the RGB color space.
• Command Format: IRBRT -i (input) -r (red) -g (green) -b (blue)
• Parameters:
-i (input): 1 - 8
-r (red): -25.0% - 25.0% (Default: 0%)
-g (green): -25.0% - 25.0% (Default: 0%)
-b (blue): -25.0% - 25.0% (Default: 0%)
• Query Format: IRBRT -i input -?