Barco DCS-200 - Manual (Page 42)

42 DCS-200 • User’s Guide
4. Operation
Quick Function Reference
Save output configuration Save Output Config 49
Save system state Save System State 81
Select inputs Input Selection Rules 84
Set Auto Input Config mode Auto Input Config 71
Set Auto Input Save mode Auto Input Save 72
Set Auto Take mode Auto Take 72
Set Black Auto Take mode Black Auto Take 72
Set color input space Colorspace 56
Set DVI cable equalization DVI Cable Equalization 79
Set Ethernet parameters Ethernet 74
Set In Auto Acquire mode In Auto Acquire 70
Set input format Input Format 55
Set input type Type 56
Set Key Auto Take mode Key Auto Take 72
Set Menu Context mode Menu Context 73
Set or change multiple input configurations File Association Menu 79
Set or change a single input configuration Recall Config 66
Set output format Output Format 48
Set Preview or Program mode Adjust On 55
Set Serial port parameters Serial Setup 76
Set up EDID EDID Setup 77
Set up Key Key Setup Menu 67
Set up LOGO LOGO Setup Menu 69
Set up sync Sync Setup 49
Set user preferences User Preference 70
Set VFD brightness VFD Brightness 73
Understand auto acquire Understanding Auto Acquire 86
Use Black Using Black 93
Use Freeze Using Freeze 92
Use HDCP Using HDCP 86
Use inputs Using Inputs 84
Use Keys Using Keys 95
Use the Input Menu Input Menu 53
Table 4-1. DCS-200 Quick Function Reference Table (Continued)
How to: Use the Following Section: Page