Barco DCS-200 - Manual (Page 150)

150 DCS-200 • User’s Guide
_K==oÉãçíÉ=`зенкзд
Remote Commands
• Parameters:
-o (output): 1 - DVI, 3 - Preview DVI
-m (mode): 0 - off, 1 - on
• Query Format: OTPM -o (output) -?
• Query Response: OTPM -o (output) - m (mode) --min 0 -- max 1
lqmq=
• Description: Output Test Pattern Type
• Command Format: OTPT -o (output) - t (type)
• Parameters: -o (output): 1 - DVI, 3 - Preview DVI
• -t (type): 1 - H Ramp
2 - V Ramp
3 - 100% Col Bars
4 - 16x16 Grid
5 - 32x32 Grid
6 - Burst
7 - 75% Col bars
8 - 50% Gray
9 - Gray Steps 1
10 - Gray Steps 2
11 - White
12 - Black
13 - Red
14 - Green
15 - Blue
• Query Format: OTPT -o (output) -?
• Query Response: OTPT -o (output) - t (type) --min 1 -- max 15
• List Format: OTPT -o (output) --list
• List Response: 1:"H Ramp"
2:" V Ramp"
3:"100% Col Bars"
4:"16x16 Grid"
5:"32x32 Grid"
6:"Burst"
7:"75% Col bars"
8:"50% Gray"
9:"Gray Steps 1"
10:"Gray Steps 2"
11:"White"