Barco DCS-200 - Manual (Page 52)

52 DCS-200 • User’s Guide
4. Operation
Using the Setup Menu
illustration:
Figure 4-19. Different Preview and Program Resolutions
qÉëí=m~ннЙкел=EmêÉîáÉïF
In the Preview Menu, the Test Patterns submenu provides the following options:
• Mode enables or disables the test pattern generator. The values are ON and OFF .
• Type provides a list of the available test patterns. The choices are:
• Raster Box — This function enables or disables the raster box on the Preview
output.
~ When turned ON , the system displays a one-pixel border around the
active output area. Note that the raster box includes gaps that enable
you to precisely align the input video to fill the output raster.
~ When turned OFF , the output is clean, without the border.
mêÉîáÉï=póåÅ=
From the Preview Menu, select Sync Setup to independently adjust the output sync
polarity of the analog and DVI outputs of the Preview. The Preview Sync Menu looks like
the one in the following illustration.
Figure 4-20. Preview Sync Setup Menu (sample)
~ H Ramp
~ V Ramp
~ 100% Col Bars
~ 75% Col bars
~ 16 x 16 Grid
~ 32 x 32 Grid
~ Burst
~ 50% Gray
~ Gray Steps 1
~ Gray Steps 2
~ Red
~ Green
~ Blue
~ White
~ Black
P R E V I E W S Y N C
A n a l o g S y n c
- H - V
D V I S y n c + H + V