Dcs-200 command list, A`pjomm=`згг~ез=iáëí, K==oéãçíé=`зенкзд – Barco DCS-200 User Manual
Page 131
DCS-200 • User’s Guide
131
_K==oÉãçíÉ=`зенкзд
DCS-200 Command List
a`pJOMM=`згг~еЗ=iáëí
The table below lists DCS-200 remote commands.
Table B-3. DCS-200 Remote Commands
Command
Description
Page
Ethernet Commands
Enable/Disable DHCP mode
Get MAC Address
Set gateway to be used when DHCP is OFF
Set Static IP Address to be used when DHCP is OFF
Set subnet mask to be used when DHCP is OFF
Input Commands
Input Source Acquire. Does a "force" acquire of the input
Auto Input Acquisition Mode
Set background color
Puts black into the scaler selected
Set cable equalization
Set Input EDID Resolution
Set EDID type
Freeze the input on program
Selects the input path to adjust (preview or program)
Adjust Input Aspect Ratio
Attempts to detect and adjust input video to the active video area
Query only command for input availability
Input brightness adjust
Delete Input Configuration
Input contrast adjust
Input Phase Adjust
Recalls saved input configuration for selected input
Reset Input Configuration to default values
Saves Input Configuration
Input Colorspace Adjust
Input Horizontal Active Adjust
Input Horizontal Crop