1-4. connecting to local dvr sever – EZWatch Pro 3.1 User Manual
Page 115
Advertising
115
Listen: It will allow remote user listen to the local site DVR.
About: Press to see the program version.
5-1-4. Connecting to Local DVR SEVER
This chapter shows you how to connect to Local DVR Server.
Make a IP address or ID code connection via Internet
1. Connect to the Internet or Intranet with your computer first.
2. Click
on the bottom Tool bar and you should see below window.
Fig 5-1-4.1
3. Connecting to the Local DVR Server via Internet:
Local DVR Server has a fix IP
a.) Enable ―IP address‖ at the top of the window.
b.) Enter the ―IP address‖ (IP address or DNS)
c.) Enter the site name that you wish to connect to in the ―Local site‖ box.
Its name is up to you.
Advertising