EZWatch Pro 3.1 - Manual (Page 154)

154
8. If you have problems connecting check your username, password,
and the IP Address to ensure that they are the same settings as the
EZWatch Pro 3.1HD server. If they are correct, then check to see if
your wireless connection to your network or the Internet is working.
These are the most widely found problems of not connecting to the
server.
9. Now that you are up and going, you can refer to your manual for
more in-depth instructions on how to program some of the more
advanced features of the PDAView software.
7-8. How to burn Video Clips to a CD/DVD
Follow the steps below to successfully Burn clips to a CD or DVD writeable
disk. Depending on the Burner you have, you may already have software
installed on your computer capable of burning clips for you, such as Nero or
NTI CD-M aker. If not, then you can use W indow ’s X P to burn them for you
as shown below.
Step #1:
C lick “S tart, go to “M y C om puter”, and open up “Local D isk (C :)” or
whichever drive letter you have EZWatch Pro 3.1 currently
recording to. C lick on the “Pro C lips” folder and select the C am era,
Year, Month, and Day of the clips you want to Burn.
Step #2:
Once you are in a folder and you see the clips that you want to burn,
you left click on it and choose “C opy”. If you want to burn more than
one clip at a time, you will hold down the Ctrl button on your
keyboard and left click all the clips you want, highlighting them as
you go. Once highlighted, left click on one of them and choose
“C opy”. This w ill select all them to be copied and then pasted to your
CD-RW or DVD-RW drive later on. Now close out all open windows
so you’re back to the desktop.