EZWatch Pro 3.1 User Manual
Page 84
84
Function Description:
Control: You need to specify the device for setting.
No/Name: Enter “Controller name” corresponding to the desired relay
number.
Duration: Enter the controller’s w orking period w hen relay trigger.
OK: Click to accept setting. Copy: Copy the parameter setting to
another relay.
Cancel: Discard changes in parameter.
b.) Control NetCom Module relay (Optional)
This function is to test remote controlling. Please click the ―C ontrol NetCom
M odule relay‖ button from the “setup I/O port” to enter the setup interface as
showing below.
Fig. 4-1-9.3
c.) Setup NetCom Module sensor (Optional)
Step1. Click ―Setup N etC om M odu le sen sor‖
button on setup I/O port, the window will
display as Fig. 4-1-9.4. Please follow the
instructions below to complete setting.
Step2. Choose a Sensor in pull-down menu.