EZWatch Pro 3.1 - Manual (Page 85)

85
Enter location of specified sensor in ―Location ‖ box.
Step3. Choose sensor type (NC or NO) in ―Type‖ box.
Step4. Select ―Enable recording‖ and/or ―Enable sn apsh ot‖ and/or
―Enable sou n d alarm ‖ and/or ―En able n otification‖ and/or “Trigger
speed dome” and “Enable TV out” configure their corresponding
options to the right.
 Pop up video window: This function is to set up the corresponding camera
of the sensor, and enable this function to pop up the setting camera while
the sensor has been triggered.
 Enable recording: select camera you want to record when emergency call
is pressed.
 Enable Snapshot: select camera to snapshot when emergency call is
pressed.
 Enable sound alarm: You can set each camera to have its own unique
alarm sound.
 Enable notification: See details on how to set up Notification on page 37.
 Trigger speed dome: See details on how to set up position on page 41.
 Enable TV out: Please refer to page 44 for detail “Enable TV out” setting .
Step5. Select the specific trigger relays to use from Relay 01 to 06(Back
Panel). It also can trigger the relays of each NC-180AZ module.
Step6. Enter” Post recording” tim e to continue recording after sensor is
triggered.
Step7. C lick “O K ‖ to complete.
d.) Emergency call
This function is to set up emergency notification when the panic button is
pushed, simply click the icon and follow the setup interface instruction to
configure the emergency call feature which are sound an alarm, notify someone,
Fig. 4-1-9.4