EZWatch Pro 3.1 User Manual
Page 139
139
Hint:
You will have an entry
for each one of the ports 1201,
1001, 1501 and 1901. Like
the example below.
Note: Some routers already
have port 80 forwarded or
included. S om e IS P’s block
port 80 to prevent its users
from web hosting. It is then
necessary to use port 8000
instead. You should use port
8000 if you aren’t sure.
Step #5: Finding the IP address of your DSL or Cable Modem:
The easiest way to determine the IP address of your DSL or Cable Modem is
address dow n and take it w ith you. W hen you’re at the rem ote com puter,
the EZNetwork 3.1 application will prompt you for an IP address. This is the
one you will use.
Hint:
If you are accessing the computer from inside your network or from a
computer that is also connected to the same router or cable modem, then
you can input the local IP address of the computer running EZWatch Pro
3.1.
Step #6: Firewalls:
If you are using any type of firewall whether it is software or hardware, you