EZWatch Pro 3.1 User Manual
Page 13
13
Remote Access
The digital video recorder system can be accessed via dial-up, company
network, internet (cable or DSL) with dynamic or static IP addresses as well as
PDA's. All functions of the system are available remotely as long as the users
access level allows.
Remote Alarm Monitoring
The digital video recorder system can be easily programmed to transmit remote
video alarms to a remote PC, PDA or email when a cameras motion detection
feature is activated.
Web Browser Access
Using a standard web browser you can access the system through the internet.
No custom software is needed to remotely view, playback video or control
Pan-Tilt-Zoom security cameras.
PDA Control and Viewing
EZWatch Pro 3.1 HD allows you to control your system, including Pan-Tilt-Zoom
cameras, right from you PDA, anywhere-anytime.
Remote Audio Monitoring
The system provides remote audio feed from the location, assuming the audio
feature is configured on-site.
Multi Site and Multi Camera Viewing
EZWatch Pro 3.1 allows you to remotely view any combination of cameras from
a remote location on one screen. Our software allows you to view and play back
up to twenty five cameras on one screen from up to twelve different locations.
IO Control
The system supports complete alarm input and relay output mapping controls.
Allowing you to connect panic buttons, motion detectors, burglar alarm panels
and other alarm input devices into the system. The inputs can be programmed
to start recordings, launch remote alarm notifications via email, PC, PDA and
control out put devices such as auto dialers, sirens, warning lights etc.
Dual Monitor Display
Our dual view features allow live and video playback to be viewed on separate
monitors.