EZWatch Pro 3.1 - Manual (Page 73)

73
Please refer to the chapter 3-2-3-3 EzSyncPlayback for detail of the
Playback toolbar functions.
4-1-5. Network Configuration
 Do not setup the Identify Server. This section of the software is
not functional with this version.
 Set up E-Map
Enter the information for the DVR and insert a map to arrange the location of
the device. Once these devices are triggered, the information can be
transferred to a remote PC via modem or internet. The triggered devices will
be flashed on the map at the same time. Follow the instructions below to