EZWatch Pro 3.1 - Manual (Page 59)

59
1.) Software detection -- Selecting software detection will save you the cost of
installing extra devices, but will cause false alarms more easily.
2.) Sensitivity of motion detection – You can adjust the sensitivity of the
motion detection. Slide the bar to the right to increase sensitivity or left to
decrease sensitivity.
The value for sensitivity should be based on unavoidable movement in the
area of the camera. For example, if you have a fan blowing, a banner may
be moving slightly. Adjusting the sensitivity properly will filter out this
movement.
3.) Set up area –Use this button to set specific areas for motion detection.
 To add a specific area for detection, please follow the setting steps
below:
Step1: Press mouse left button and hold to move mouse for selecting a
specific area on the screen.
Step2: Press ―A dd area‖ button to add the area diction.
Step3: To set more another area, please repeat the step1 to step2.