EZWatch Pro 3.1 - Manual (Page 121)

121
5-1-6. Using the Site Book
The site book will conveniently remember all the necessary information about a
site that you wish to connect to so you will not have to type it all over again
every time you connect. Begin by clicking in the tool bar or in the lower
right corner of the menu. You will see the window below.
Please follow steps as below to set up the site book:
1. Fill in a “No”. If you fill in a “No” that is not taken, you w ill be able to. The
numbers you choose do not matter, as long as they are not already being
used – the numbers are only for distinction. Note that if you ever add an
entry with the same number as an existing one in the book, the original will
be deleted.
2. Fill in “Site name” or select the available Local D V R S erver in the pull-down
menu.
3. Click ID code or IP address for “Connection type” and fill ID code or IP
address/DNS, respectively.
4. Fill in ―P ort‖. The num ber of “Port” m ust be m atched betw een EZNetwork
and EZWatch Pro. EZWatch Pro default is 1001.
5. Fill in ―U sernam e‖ and ―P assw ord‖. The administrator of Local DVR