EZWatch Pro 3.1 - Manual (Page 57)

57
P lease follow the steps below to set up the ―Set TV ou t w h en
triggered‖ section:
Step1: S elect the D V R card in the “D evice” section.
Step2: Select the cam era in the “TV out” section.
Step3: Press the “A dd” button to save the setting.
Step4: To set another “TV out” setting, please repeat from step1 to
step3.
To “S et TV out w hen stop trigger”, please use the sam e w ay of the “S et
TV out w hen triggered” section setting.
 Trigger relay: You can select the specific trigger relays to use and
select from Relay 01 to Relay 06. You can also trigger the relays of each
NC-080AZ module. The relay will be triggered when motion is
detected.