EZWatch Pro 3.1 - Manual (Page 48)

48
should set it as two segments: 7:00 to 23:59 and 00:00 to 7:30.
When you set schedules of sequential recording and motion detection
recording, please do not schedule overlapping periods. Overlapped
periods will be executed improperly. Ex. Sequential recording is
scheduled between 3:00 and 5:00 and motion detection recording is
from 4:00 to 7:00. Because of overlap, EZWatch Pro will only execute
sequential recording from 4:00 to 5:00 and motion detention from
5:01 to 7:00.
Section 3:
 Frame rate: To set the recording fram e rate for the “S equence
recording” or “M otion detection recording”.
Same as preview: To set recording frame rate as same as the live
view frame rate.
 Priority recording: This function is to set a recording frame rate
while motion detection is enabled but not triggered. The DVR will
record the video according to the setting frame rate, but if the motion
has been triggered, the DVR will start the motion detection recording
setting frame rate. (This function just enable when you use the Motion
detection recording)
 File close and renew when motion detection:
If user enables this function, when the motion detection has been
trigged, the system will close the priority-recording file, and start a
new file for motion recording. Enable this function to provide user
easily search the motion issues in then evens list log. However, if
disable this function, user can review the video clips from the begging
to see how is the motion triggered, but the motion even dose not list in