Smv bracket installation, Figure 3-18: smv bracket installation – Landoll 855 Series Finisholl User Manual
Page 58
Advertising
3-24
F-133-0512 Edition
ASSEMBLY INSTRUCTIONS
SMV Bracket Installation
1.
Install the SMV brackets close to the center of
machine on rear frame member. Bolt together SMV
mounting bracket and warning light bar with 1/2-13 x
5-1/2 hex head cap screws and 1/2-13 hex lock nuts
through holes in bracket parts so that brackets are
snug around frame member (See Figure 3-18.)
2.
Attach SMV emblem to SMV mounting bracket using
1/4-20 x 1 hex head cap screw and 1/4-20 hex lock
nut.
Figure 3-18: SMV Bracket Installation
REAR OF FRAME
1/4-20 HEX LOCK NUT
SMV EMBLEM
1/4-20 HEX HEAD
CAP SCREW
1/2-13 HEX LOCK NUT
WARNING LIGHT BAR
SMV MOUNTING BRACKET
1/2-13 X 5-1/2 HEX
HEAD CAP SCREW
smv bracket inst
Advertising
This manual is related to the following products: