Landoll 855 Series Finisholl - Manual (Page 67)

ASSEMBLY INSTRUCTIONS
3-33
Pull Hitch Installation
IMPORTANT
See Figure 3-24 for part names.
1. Install pull hitch to frame using hitch pins and cotter
pins.
2. Assemble the hitch ring to the pull hitch as shown
with the recess down.
3. Install jack on pull hitch. Do not overtighten U-bolts
on jack. It will cause jack to bind.
IMPORTANT
Use jack mounting tube on right side of pull hitch for
correct angle on jack.
4. Install hose bracket and hose bracket mount on pull
hitch with special nut, screw, and lock nuts.