MTS Series 505 SilentFlo Hydraulic Power Unit Model 505-180 - Manual (Page 33)

Model 505.60 HPU Specifications
Model 505.60 - 505.180 SilentFlo™ HPU Introduction 33
Model 505.60 HPU Specifications
Parameter Specification
Pump/Motor
Number of pump/motors
Maximum continuous
pressure
Maximum flow capacity
Motor rating *
Current draw †
* For one motor
† For all motors
Wye-Delta starter configuration
2
21 MPa (3000 psi)
200 L/m (53.2 gpm) at 50 Hz
227 L/m (60 gpm) at 60 Hz
45 kW (60 hp) at 50/60 Hz
156 A continuous at 460 V AC 60 Hz
188 A continuous at 380 V AC 50 Hz
Reservoir capacity 950 L (250 gal) maximum
605 L (160 gal) minimum
Water flow rating
(input temperature)
10°C (50°F)
15.5°C (60°F)
21.1°C (70°F)
26.7°C (80°F)
32.2°C (90°F)
Heat load (maximum)
34.1 L/m (9.0 gpm)
41.6 L/m (11 gpm)
56.8 L/m (15 gpm)
83.3 L/m (22 gpm)
177.9 L/m (47 gpm)
89.6 kW (306,000 Btu/hr)
Dimensions
Length
Height
Width
2870 mm (113 in)
2006 mm (79 in)
990 mm (39 in)
Weight
Empty
With hydraulic fluid
1703 kg (3754 lb)
2276 kg (5017 lb) minimum fluid level
2615 kg (5766 lb) maximum fluid level
Noise ‡ rating at 1 m
‡ Sound pressure level [dB(A)] is expressed as a free field value.
Readings may vary with the acoustic environment.
68 dB(A) fully compensated