MTS Series 505 SilentFlo Hydraulic Power Unit Model 505-180 - Manual (Page 35)

Model 505.120 HPU Specifications
Model 505.60 - 505.180 SilentFlo™ HPU Introduction 35
Model 505.120 HPU Specifications
Parameter Specification
Pump/Motor
Number of pump/motors
Maximum continuous
pressure
Maximum flow capacity
Motor rating *
Current draw †
* For one motor
† For all motors
Wye-Delta starter configuration
4
21 MPa (3000 psi)
400 L/m (106.4 gpm) at 50 Hz
454 L/m (120 gpm) at 60 Hz
45 kW (60 hp) at 50/60 Hz
310 A continuous at 460 V AC 60 Hz
374 A continuous at 380 V AC 50 Hz
Reservoir capacity 1893 L (500 gal) maximum
1211 L (320 gal) minimum
Water flow rating
(input temperature)
10°C (50°F)
15.5°C (60°F)
21.1°C (70°F)
26.7°C (80°F)
32.2°C (90°F)
Heat load (maximum)
68.1 L/m (18.0 gpm)
71.9 L/m (19 gpm)
90.8 L/m (24 gpm)
113.6 L/m (30 gpm)
174.1 L/m (46 gpm)
179.2 kW (612,000 Btu/hr)
Dimensions
Length
Height
Width
4270 mm (168 in)
2006 mm (79 in)
990 mm (39 in)
Weight
Empty
With hydraulic fluid
2896 kg (6384 lb)
3954 kg (8717 lb) minimum fluid level
4561 kg (10056 lb) maximum fluid level
Noise ‡ rating at 1 m
‡ Sound pressure level [dB(A)] is expressed as a free field value.
Readings may vary with the acoustic environment.
70 dB(A) fully compensated