MTS Series 505 SilentFlo Hydraulic Power Unit Model 505-180 - Manual (Page 47)

Model 505.60—505.180 HPU Electrical, Hydraulic, and
Model 505.60 - 505.180 SilentFlo™ HPU Installation 47
Installation
Contents
Model 505.60—505.180 HPU Electrical, Hydraulic, and Water
Connections 47
Model 505.60 HPU Setup 52
Testing Model 505.60 HPU Operation 56
Precharging the Optional Surge Suppressor Accumulator 59
Model 505.60—505.180 HPU Electrical, Hydraulic, and Water Connections
1. Position the hydraulic power unit.
Lifting the HPU in the middle of its chassis can strain the structural integrity
of the HPU.
Do not lift the HPU in the middle of its chassis.
Lift the HPU from each end of the chassis, as shown in the next figure.
CAUTION
When moving the HPU with
a fork lift or pallet jack, lift the
HPU from both ends.
When moving the HPU with an
overhead lift, use a spreader bar
to help balance the weight.