Ims node specifications – Sensaphone IMS-4000 Users manual User Manual

Page 36

Advertising
background image

IMS-4000 Manual

34

loCal ConfiGUraTion DefiniTions

Parent Host IP Address: This is the IP address of the IMS-4000 Host that this Node is associated with.
Node IP Address: This is the IP address assigned to the IMS-4000 on your network. This address is provided by you or

your network administrator. It is formatted as a standard dotted decimal number.
Subnet Mask: This is the subnet mask which distinguishes the portion of the IP address that is the network ID from the

portion that is the station ID.
Default Gateway: A TCP/IP network must have a gateway to communicate beyond the LAN identified by the network ID.

A gateway is a computer or router that is connected to two different networks and can move TCP/IP data from one to the

other. If your TCP/IP network has more than one LAN or if you are connecting to the Internet, you will need to know the

IP address of the gateway that will transfer TCP/IP data in and out of your LAN. A single LAN that is not connected to

other LANs does not require a gateway setting.
DNS Server: The DNS server is used to translate site names into actual numeric network addresses. Enter the IP address of

the DNS server for your network.
Node Name: This name will appear in the IMS-4000 ConsoleView Software. In systems with many Nodes, the Name is use-

ful for identifying one node from another.

iMs noDe speCifiCaTions

operaTinG speCifiCaTions

Temperature: 32-122°F

Humidity: 5–90% RH non-condensing

Power Supply: 120VAC 60Hz

Power Consumption (Typ): 10 Watts

Dimensions: 1.8"h x 7.0"d x 9.6"w

Backup Battery: (1) 6V 3.4AH sealed rechargeable

Backup Time: 3.5 Hours

CoMMUniCaTion speCifiCaTions

Ethernet: 10/100 Base-T, 10/100Mbps

RS-232: DB9, 9600bps, DTE

enVironMenTal MoniTorinG

Internal Monitoring: AC Power, Backup Battery Level, Sound Level (in dB)

Number of Sensor Ports: 8

Sensor Types: Temperature, Humidity, Water, Power, Infrared Motion, Smoke, Dry Contacts

Sensor Input Connector: RJ-45

Sensor Cables: CAT-5, 568B

Cable Length: 1000'

External Microphone: 3.5mm jack, electret condenser

Advertising