Sensaphone IMS-4000 Users manual - Manual (Page 62)

IMS-4000 Manual
60
holiDay seTUp
The IMS-4000 allows you to program recurring or non-recurring holidays that you can use within your schedule program-
ming. These schedules are used to enable or disable monitoring of Environmental and IP Alarms, and also to enable/disable
times when users will receive alarm calls.
To see which holidays are currently programmed, expand the Settings menu by clicking the plus sign next to the word
Settings, then expand the Holidays menu by clicking the plus sign next to the word Holidays. See sample below:
Figure 39: Holiday List
To view the programming of a particular holiday, right-click on the holiday name and select Properties.
To program a new Holiday, expand the Settings menu and right-click on the word Holidays, then select Add New Holiday.
The new holiday programming screen will appear as shown below:
Figure 40: New Holiday
Enter a name for the holiday. Select the month, day, and year for the holiday. Finally, select whether the holiday is recurring.
Click OK when finished.
alarM MessaGe pop-Ups
While online with one or more IMS-4000 units through the ConsoleView Software, you can have an alarm message pop
up on your computer screen whenever an alarm occurs. This could be an environmental or IP alarm on any Host or Node.
You can configure this feature to display a general message indicating the Unit and Channel names, or you can associate a
custom message with each input. The custom message can be displayed as plain text or HTML. The custom messages can be
stored either on the local workstation or a drive that is regularly mapped to the workstation.
activating alarm pop-Ups
Click on File, then Options from the main menu in the ConsoleView Software. The following screen will appear.
Figure 41: Options Screen