Sensaphone IMS-4000 Users manual - Manual (Page 83)

81
Chapter 5: PowerGate
parTs reqUireD
Phillips Screwdriver 9 pin F/F null modem cable
operaTinG enVironMenT
Before you install the IMS-4301 PowerGate be sure that your operating environment meets the physical requirements of the
equipment.
Operating Temperature: 32º–95º Fahrenheit (0º–35º C)
Humidity: 5–90 %RH, non-condensing
Power: 120VAC 60 Hz outlet within 6'
Rack Requirements: Standard 19" equipment rack with supplied mounting bracket hardware. Requires 1.0 EIA
rack mount space.
Tabletop requirements: Flat area which can support an enclosure 17" wide by 10" deep by 2" high.
raCk MoUnT insTallaTion
The IMS-4301 PowerGate can be rack mounted using the included rack mount brackets. Follow the steps below:
1) Attach the rack-mount brackets to the PowerGate with a Phillips screwdriver.
2) Attach the unit to the equipment rack using two pan-head screws per side. Tighten the screws with a Phillips screw-
driver.
3) Plug the power cord into a 120VAC outlet.
Figure 3: Rack-mounted PowerGate Unit
TableTop insTallaTion
The IMS-4301 PowerGate can be installed on a tabletop or shelf. Follow the steps below:
1) Attach the four self-adhesive rubber feet to the four corners on the bottom of the PowerGate.
2) Place the unit on a tabletop or shelf and connect the power cord into a 120VAC outlet.
Figure 4: Tabletop-mounted PowerGate Unit