Sensaphone IMS-4000 Users manual - Manual (Page 41)

39
Chapter 2: IMS-4000 Software
To get started, double-click on the IMS-4000 software icon. This will bring up the IMS ConsoleView Screen.
Figure 6: IMS ConsoleView screen
adding an enterprise Group
From the ConsoleView menu, click on Enterprise and select Add Enterprise Group. In the left-hand column, a New Enterprise
Group will appear. When you connect to the host, the Enterprise Name will update.
Deleting an enterprise Group
If at any time you wish to delete an Enterprise group, click to highlight the Enterprise Group you would like to delete, select
Enterprise from the main menu and choose Delete Enterprise Group.
aDDinG a hosT
Right-click on the words IP Unknown below the enterprise name and select Set IP Address. Enter the IP address for your
IMS-4000 Host and click OK. The software will prompt you for a username and password to log in. For new units, the
default username is admin and the default password is ims4k. The software will now attempt to connect to your IMS-4000
Host. A progress bar will show the software retrieving information from the Host.
Default Username: admin
Default Password: ims4k
Note: Do not save the default username and password, because it will be deleted automatically once a Master System
Administrator profile is configured.
Figure 7: Entering the Host address
To see the programming, inputs, and accessories associated with the host, click in the box beside your enterprise group. The
tree hierarchy will appear beneath the Host.
Figure 8: Host Tree