Sensaphone IMS-4000 Users manual - Manual (Page 63)

61
Chapter 2: IMS-4000 Software
Within the section titled “Alarm Notification” click in the box to Enable Alarm Pop-Up Notifications. This will activate the
Alarm Message Pop-Up feature. When an alarm occurs, a message will appear that simply displays the Unit and Channel
names. If the user has permission to acknowledge the alarm, an Alarm Acknowledgment box will also appear. A sample
message is shown below.
Figure 42: Simple Alarm Popup
enabling Custom pop-Up Messages
To have custom messages pop up, you must enable this feature. Select Options from the main menu. Click in the box labeled
Include Custom Message with Alarm Pop-Ups. Next, you must select where your custom messages will be stored (see below).
setting pop-Up Text location
When using custom pop-up messages you must specify where these messages will be located. To do this, right-click on the
name of your host within the menu tree and select Alarm Pop-Up Notice Location. Select the drive and folder where the mes-
sages will be stored.
editing pop-Up Custom Message
To edit the custom message for a particular environmental input or IP alarm, right-click on the chosen input and select Edit
Alarm Pop-Up Message. The following screen will appear.
Figure 43: Edit Popup Screen