Sensaphone 1400 - Manual (Page 101)

Chapter 7: Operation
99
Special Dialing Codes Summary
Code 1: Numeric pager type
Code 2: Wait for answer
Code 3: Change to Touch-Tone
Code 4: Pause
Code 5: *
Code 6: #
Description Touch-Tone Command
Setting a phone number S(7) + T(8) + (entry 1–8) + (telephone
number) + #
Description Touch-Tone Command
Reciting a phone number W(9) + T(8) + (entry 1–8)
Record and Play Custom Voice Messages
The following commands will allow you to record and play
back custom voice messages for the ID message (0) and each
zone (1–4).
Description Touch-Tone Command
Record a Message S(7) + M(6) + (entry 0–4)
Description Touch-Tone Command
Play a Message W(9) + M(6) + (entry 0–4)
Control the Relay Output
The following commands will allow you to check the status of
the relay output and to toggle the Relay Output On and Off.
Description Touch-Tone Command
Reciting the Output Status W(9) + R(7) + O(6)
Description
Touch-Tone Command
Switching the Output S(7) + R(7) + O(6)
Activate Microphone Listen-in
The following command will allow you to activate the
microphone listen-in for the programmed duration.
Description Touch-Tone Command
Activate Mic Listen-in M(6) + I(4) + C(2)