Sensaphone 1400 - Manual (Page 112)

Sensaphone 1400 Manual
110
c) Temperature may require
calibration.
d) The unit is using the wrong
temperature scale (Fahrenheit vs.
Celsius).
After moving or placing the sensor
away from ambient heat sources, the
temperature may be calibrated to
offset inaccurate normal reading by
several degrees.
Refer to Chapter 4.
Verify temperature scale.
Refer to Chapter 4.
TEMPERATURE MONITORING
(continued)
Cause
a) The zone is configured for the
wrong type of thermistor (i.e., 2.8k
vs. 10k)
b) Temperature sensing may be
affected by a source of ambient
heat (ie., direct sunlight, or heat
duct proximity).
Solution
Manually configure the zone as
described in Chapter 4.
Try moving the sensor to a different
location.
Problem 4
Temperature reading is inaccurate.