Sensaphone 1400 - Manual (Page 60)

Sensaphone 1400 Manual
58
ALARM DIAL-OUT TELEPHONE NUMBERS
The Sensaphone 1400 will dial up to eight 48-digit phone numbers
to report alarm conditions. These are the numbers that will be called
during an alarm dial-out. The unit can deliver an alarm message
via voice telephone call or numeric page. The telephone numbers
are dialed sequentially 1 through 8. Therefore, program the first
number you want called as Phone #1, the second one as Phone #2,
and so on. A pause, pound or asterisk can be added to the phone
number to access different phone and beeper systems (see special
dialing options). Once the alarm is acknowledged, all dial-out stops.
Voice Dialout
When 1400 calls in Voice mode it will announce the ID
Message and the alarm message. Afterward it will ask for the
acknowledgement code. If a correct code is entered, the unit will
stop dialout. If the wrong code is entered it will hang up and
continue dialing the next number.
To program a VOICE dial-out telephone number:
1. Press the SET key.
2. Press the PHONE NUMBER key. The 1400 will say “Enter
Number.”
3. Select which Phone number to program. Press any unassigned
number key (keys 1–8) to represent the new telephone number
entry. 1400 will respond “Enter number.”