Sensaphone 1400 - Manual (Page 102)

Sensaphone 1400 Manual
100
Request Status Report
The following command will initiate a status report.
Description Touch-Tone Command
Recite status report W(9) + S(7) + R(7)
Request Alarm History
The following command will recite the alarm history.
Description Touch-Tone Command
Recite alarm history H(4) + I(4) + S(7)
Hang-up
The following command will make the 1400 hang up the
telephone line.
Description Touch-Tone Command
Hang-up the phone line B(2) + Y(9) + E(3)
NOTE: If a security code is enabled, the 1400 will
prompt you with “Enter security code.” Enter the
four-digit keypad security code plus “ #” to enter
touch-tone command mode. If entered correctly, the
1400 will respond with “OK” and you can proceed
to enter the commands. If entered incorrectly, the
unit will give you one more chance. If it is incorrect
a second time, the unit will say “Error, goodbye”
and hang up.