Sensaphone 1400 User Manual
Page 85
Advertising
Chapter 5: Communication Programming
83
LISTEN-IN TIME
The Listen-In Time is the amount of time you can listen to sounds
at the unit’s location during a status call-in. An external microphone
(optional) is required to listen in to on-site sounds. The programmable
range is 0 to 255 seconds. The default setting is 0 seconds (disabled).
To program the Listen-In Time:
1. Press the SET key.
2. Press the LISTEN TIME key.
The 1400 will say “Enter seconds.”
3. Using the number keys, enter the seconds, then press ENTER.
The 1400 will say “OK.”
To play back the Listen-in Time:
1. Press the WHAT IS key.
2. Press the LISTEN TIME key
The 1400 will recite the time programmed.
Advertising